We proudly use hardware by PEM
Nut, 10-24 Zinc plus Clear Chromate
Aluminum: 5052, 6061, 7075 Steel: Mild, G90
| SKU | SS-024-1 |
| Thread Size | 10-24 |
| Hole size in sheet (+0.003/-.0.000) | .250″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | N/A |
| Fastener material | Steel |
| Minimum distance hole C/L to edge | 0.280″ |
| When determining the distance between two or more fasteners, you can calculate the distance by the formula, C/L to edge + 1/2 the diameter of the second mounting hole. | .407″ |
| Recommended panel material | Steel/Aluminum |
| Coating type | Zinc |
| Thickness (T) above material after install | .090″ |
| Aluminum material ranges (5052, 6061, 7075) | 0.040″-0.500″ |
| Steel material ranges (CRS, HRPO, HR) | 0.048″-0.500″ |
We proudly use hardware by PEM
Nut, 4-40 Passivated and/or Tested
Stainless Steel: 304, 316
| SKU | SP-024-1 |
| Thread Size | 10-24 |
| Hole size in sheet (+0.003/-.0.000) | .250″ |
| Minimum sheet thickness | 0.04″ |
| Maximum sheet thickness | N/A |
| Fastener material | A236 Hardened Stainless Steel |
| Minimum distance hole C/L to edge (K) or bend (N) | 0.313″ |
| Minimum C/L to C/L distance between two of the same hardware size (M) | .593″ |
| Recommended panel material | Stainless Steel |
| Coating type | Passivated and/or tested |
| Thickness (T) above material after install | .090″ |
| 304 Stainless Steel material ranges | 0.048″-0.500″ |
| 316 Stainless Steel material ranges | 0.060″-0.500″ |